up

1 files changed, 143 insertions, 0 deletions

diff --git a/.config/mpv/script-opts/mpv_thumbnail_script.conf b/.config/mpv/script-opts/mpv_thumbnail_script.conf
new file mode 100644
index 0000000..80a3c22
--- /dev/null
+++ b/.config/mpv/script-opts/mpv_thumbnail_script.conf
@@ -0,0 +1,143 @@
+# The thumbnail cache directory.
+# On Windows this defaults to %TEMP%\mpv_thumbs_cache,
+# and on other platforms to ${TEMP} or ${XDG_CACHE_HOME} or /tmp in the subfolder mpv_thumbs_cache
+# The directory will be created automatically, but must be writeable!
+# Use absolute paths, and take note that environment variables like %TEMP% are unsupported (despite the default)!
+cache_directory=/tmp/mpv_thumbs_cache
+
+# Whether to generate thumbnails automatically on video load, without a keypress
+# Defaults to yes
+autogenerate=yes
+
+# Only automatically thumbnail videos shorter than this (in seconds)
+# You will have to press T (or your own keybind) to enable the thumbnail previews
+# Set to 0 to disable the check, ie. thumbnail videos no matter how long they are
+# Defaults to 3600 (one hour)
+autogenerate_max_duration=3600
+
+# Use mpv to generate thumbnail even if ffmpeg is found in PATH
+# ffmpeg is slightly faster than mpv but lacks support for ordered chapters in MKVs,
+# which can break the resulting thumbnails. You have been warned.
+# Defaults to yes (don't use ffmpeg)
+prefer_mpv=yes
+
+# Explicitly disable subtitles on the mpv sub-calls
+# mpv can and will by default render subtitles into the thumbnails.
+# If this is not what you wish, set mpv_no_sub to yes
+# Defaults to no
+mpv_no_sub=no
+
+# Enable to disable the built-in keybind ("T") to add your own, see after the block
+# Defaults to no
+disable_keybinds=yes
+
+# The maximum dimensions of the thumbnails, in pixels
+# Defaults to 200 and 200
+thumbnail_width=200
+thumbnail_height=200
+
+# The thumbnail count target
+# (This will result in a thumbnail every ~10 seconds for a 25 minute video)
+# Defaults to 150
+thumbnail_count=150
+
+# The above target count will be adjusted by the minimum and
+# maximum time difference between thumbnails.
+# The thumbnail_count will be used to calculate a target separation,
+# and min/max_delta will be used to constrict it.
+
+# In other words, thumbnails will be:
+# - at least min_delta seconds apart (limiting the amount)
+# - at most max_delta seconds apart (raising the amount if needed)
+# Defaults to 5 and 90, values are seconds
+min_delta=5
+max_delta=90
+# 120 seconds aka 2 minutes will add more thumbnails only when the video is over 5 hours long!
+
+# Parameter that mpv should use for hardware decoding
+# If properly configured can really improve thumbnail generation speed and cpu load
+# Default to no, see https://mpv.io/manual/master/#options-hwdec for the values
+mpv_hwdec=no
+
+# Parameter that mpv should use for seeking
+# yes extracts the exact frame
+# no extracts the closest keyframe, faster but less precise
+# Default to yes
+mpv_hr_seek=yes
+
+
+# Remote options
+
+
+# Below are overrides for remote urls (you generally want less thumbnails, because it's slow!)
+# Thumbnailing network paths will be done with mpv (leveraging youtube-dl)
+
+# Allow thumbnailing network paths (naive check for "://")
+# Defaults to no
+thumbnail_network=no
+
+# Same as autogenerate_max_duration but for remote videos
+# Defaults to 1200 (20 minutes)
+remote_autogenerate_max_duration=1200
+# Override thumbnail count, min/max delta, as above
+remote_thumbnail_count=60
+remote_min_delta=15
+remote_max_delta=120
+
+# Try to grab the raw stream and disable ytdl for the mpv subcalls
+# Much faster than passing the url to ytdl again, but may cause problems with some sites
+# Defaults to yes
+remote_direct_stream=yes
+
+# Enable storyboards (requires yt-dlp in PATH). Currently only supports YouTube and Twitch VoDs
+# Defaults to yes
+storyboard_enable=yes
+# Max thumbnails for storyboards. It only skips processing some of the downloaded thumbnails and doesn't make it much faster
+# Defaults to 800
+storyboard_max_thumbnail_count=800
+# Most storyboard thumbnails are 160x90. Enabling this allows upscaling them up to thumbnail_height
+# Defaults to no
+storyboard_upscale=no
+
+
+# Display options
+
+
+# Move the thumbnail up or down
+# For example:
+#   topbar/bottombar: 24 (default)
+#   rest: 0
+vertical_offset=24
+
+# Adjust background padding
+# Examples:
+#   topbar:       0, 10, 10, 10
+#   bottombar    10,  0, 10, 10 (default)
+#   slimbox/box: 10, 10, 10, 10
+pad_top=10
+pad_bot=0
+pad_left=10
+pad_right=10
+
+# If enabled pad values are screen-pixels, else video-pixels.
+# Defaults to yes
+pad_in_screenspace=yes
+
+# Calculate pad into the offset
+# Defaults to yes
+offset_by_pad=yes
+
+# Background color in BBGGRR
+background_color=000000
+
+# Alpha: 0 - fully opaque, 255 - transparent
+# Defaults to 80
+background_alpha=80
+
+# Keep thumbnail on the screen near left or right side
+# Defaults to yes
+constrain_to_screen=yes
+
+# Do not display the thumbnailing progress
+# Defaults to no
+hide_progress=no