diff options
Diffstat (limited to '.config/dosbox/dosbox.conf')
| -rw-r--r-- | .config/dosbox/dosbox.conf | 306 |
1 files changed, 306 insertions, 0 deletions
diff --git a/.config/dosbox/dosbox.conf b/.config/dosbox/dosbox.conf new file mode 100644 index 0000000..5edf97d --- /dev/null +++ b/.config/dosbox/dosbox.conf @@ -0,0 +1,306 @@ +# This is the configuration file for DOSBox 0.74-3. (Please use the latest version of DOSBox) +# Lines starting with a # are comment lines and are ignored by DOSBox. +# They are used to (briefly) document the effect of each option. + +[sdl] +# fullscreen: Start dosbox directly in fullscreen. (Press ALT-Enter to go back) +# fulldouble: Use double buffering in fullscreen. It can reduce screen flickering, but it can also result in a slow DOSBox. +# fullresolution: What resolution to use for fullscreen: original, desktop or fixed size (e.g. 1024x768). +# Using your monitor's native resolution (desktop) with aspect=true might give the best results. +# If you end up with small window on a large screen, try an output different from surface. +# On Windows 10 with display scaling (Scale and layout) set to a value above 100%, it is recommended +# to use a lower full/windowresolution, in order to avoid window size problems. +# windowresolution: Scale the window to this size IF the output device supports hardware scaling. +# (output=surface does not!) +# output: What video system to use for output. +# Possible values: surface, overlay, opengl, openglnb. +# autolock: Mouse will automatically lock, if you click on the screen. (Press CTRL-F10 to unlock) +# sensitivity: Mouse sensitivity. +# waitonerror: Wait before closing the console if dosbox has an error. +# priority: Priority levels for dosbox. Second entry behind the comma is for when dosbox is not focused/minimized. +# pause is only valid for the second entry. +# Possible values: lowest, lower, normal, higher, highest, pause. +# mapperfile: File used to load/save the key/event mappings from. Resetmapper only works with the defaul value. +# usescancodes: Avoid usage of symkeys, might not work on all operating systems. + +fullscreen=false +fulldouble=false +fullresolution=1920x1080 +aspect=true +# windowresolution=1920x1080 +windowresolution=1366x768 +output=opengl +autolock=true +sensitivity=100 +waitonerror=true +priority=higher,normal +mapperfile=mapper-0.74-3.map +usescancodes=true + +[dosbox] +# language: Select another language file. +# machine: The type of machine DOSBox tries to emulate. +# Possible values: hercules, cga, tandy, pcjr, ega, vgaonly, svga_s3, svga_et3000, svga_et4000, svga_paradise, vesa_nolfb, vesa_oldvbe. +# captures: Directory where things like wave, midi, screenshot get captured. +# memsize: Amount of memory DOSBox has in megabytes. +# This value is best left at its default to avoid problems with some games, +# though few games might require a higher value. +# There is generally no speed advantage when raising this value. + +language= +machine=svga_s3 +captures=capture +memsize=16 + +[log] +# logfile: file where the log messages will be saved to +# vga: Enable/Disable logging of this type. +# vgagfx: Enable/Disable logging of this type. +# vgamisc: Enable/Disable logging of this type. +# int10: Enable/Disable logging of this type. +# sblaster: Enable/Disable logging of this type. +# dma_control: Enable/Disable logging of this type. +# fpu: Enable/Disable logging of this type. +# cpu: Enable/Disable logging of this type. +# paging: Enable/Disable logging of this type. +# fcb: Enable/Disable logging of this type. +# files: Enable/Disable logging of this type. +# ioctl: Enable/Disable logging of this type. +# exec: Enable/Disable logging of this type. +# dosmisc: Enable/Disable logging of this type. +# pit: Enable/Disable logging of this type. +# keyboard: Enable/Disable logging of this type. +# pic: Enable/Disable logging of this type. +# mouse: Enable/Disable logging of this type. +# bios: Enable/Disable logging of this type. +# gui: Enable/Disable logging of this type. +# misc: Enable/Disable logging of this type. +# io: Enable/Disable logging of this type. + +logfile= +vga=true +vgagfx=true +vgamisc=true +int10=true +sblaster=true +dma_control=true +fpu=true +cpu=true +paging=true +fcb=true +files=true +ioctl=true +exec=true +dosmisc=true +pit=true +keyboard=true +pic=true +mouse=true +bios=true +gui=true +misc=true +io=true + +[render] +# frameskip: How many frames DOSBox skips before drawing one. +# aspect: Do aspect correction, if your output method doesn't support scaling this can slow things down! +# scaler: Scaler used to enlarge/enhance low resolution modes. If 'forced' is appended, +# then the scaler will be used even if the result might not be desired. +# To fit a scaler in the resolution used at full screen may require a border or side bars, +# to fill the screen entirely, depending on your hardware, a different scaler/fullresolution might work. +# Possible values: none, normal2x, normal3x, advmame2x, advmame3x, advinterp2x, advinterp3x, hq2x, hq3x, 2xsai, super2xsai, supereagle, tv2x, tv3x, rgb2x, rgb3x, scan2x, scan3x. + +frameskip=0 +aspect=false +scaler=normal2x + +[cpu] +# core: CPU Core used in emulation. auto will switch to dynamic if available and +# appropriate. +# Possible values: auto, dynamic, normal, simple. +# cputype: CPU Type used in emulation. auto is the fastest choice. +# Possible values: auto, 386, 386_slow, 486_slow, pentium_slow, 386_prefetch. +# cycles: Amount of instructions DOSBox tries to emulate each millisecond. +# Setting this value too high results in sound dropouts and lags. +# Cycles can be set in 3 ways: +# 'auto' tries to guess what a game needs. +# It usually works, but can fail for certain games. +# 'fixed #number' will set a fixed amount of cycles. This is what you usually +# need if 'auto' fails. (Example: fixed 4000). +# 'max' will allocate as much cycles as your computer is able to +# handle. +# Possible values: auto, fixed, max. +# cycleup: Amount of cycles to decrease/increase with keycombos.(CTRL-F11/CTRL-F12) +# cycledown: Setting it lower than 100 will be a percentage. + +core=auto +cputype=auto +cycles=auto +cycleup=10 +cycledown=20 + +[mixer] +# nosound: Enable silent mode, sound is still emulated though. +# rate: Mixer sample rate, setting any device's rate higher than this will probably lower their sound quality. +# Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716. +# blocksize: Mixer block size, larger blocks might help sound stuttering but sound will also be more lagged. +# Possible values: 1024, 2048, 4096, 8192, 512, 256. +# prebuffer: How many milliseconds of data to keep on top of the blocksize. + +nosound=false +rate=44100 +blocksize=1024 +prebuffer=25 + +[midi] +# mpu401: Type of MPU-401 to emulate. +# Possible values: intelligent, uart, none. +# mididevice: Device that will receive the MIDI data from MPU-401. +# Possible values: default, win32, alsa, oss, coreaudio, coremidi, none. +# midiconfig: Special configuration options for the device driver. This is usually the id of the device you want to use +# (find the id with mixer/listmidi). +# Or in the case of coreaudio, you can specify a soundfont here. +# See the README/Manual for more details. + +mpu401=intelligent +mididevice=oss +midiconfig= + +[debug] + + +[sblaster] +# sbtype: Type of Soundblaster to emulate. gb is Gameblaster. +# Possible values: sb1, sb2, sbpro1, sbpro2, sb16, gb, none. +# sbbase: The IO address of the soundblaster. +# Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300. +# irq: The IRQ number of the soundblaster. +# Possible values: 7, 5, 3, 9, 10, 11, 12. +# dma: The DMA number of the soundblaster. +# Possible values: 1, 5, 0, 3, 6, 7. +# hdma: The High DMA number of the soundblaster. +# Possible values: 1, 5, 0, 3, 6, 7. +# sbmixer: Allow the soundblaster mixer to modify the DOSBox mixer. +# oplmode: Type of OPL emulation. On 'auto' the mode is determined by sblaster type. All OPL modes are Adlib-compatible, except for 'cms'. +# Possible values: auto, cms, opl2, dualopl2, opl3, none. +# oplemu: Provider for the OPL emulation. compat might provide better quality (see oplrate as well). +# Possible values: default, compat, fast. +# oplrate: Sample rate of OPL music emulation. Use 49716 for highest quality (set the mixer rate accordingly). +# Possible values: 44100, 49716, 48000, 32000, 22050, 16000, 11025, 8000. + +sbtype=sb16 +sbbase=220 +irq=7 +dma=1 +hdma=5 +sbmixer=true +oplmode=auto +oplemu=default +oplrate=44100 + +[gus] +# gus: Enable the Gravis Ultrasound emulation. +# gusrate: Sample rate of Ultrasound emulation. +# Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716. +# gusbase: The IO base address of the Gravis Ultrasound. +# Possible values: 240, 220, 260, 280, 2a0, 2c0, 2e0, 300. +# gusirq: The IRQ number of the Gravis Ultrasound. +# Possible values: 5, 3, 7, 9, 10, 11, 12. +# gusdma: The DMA channel of the Gravis Ultrasound. +# Possible values: 3, 0, 1, 5, 6, 7. +# ultradir: Path to Ultrasound directory. In this directory +# there should be a MIDI directory that contains +# the patch files for GUS playback. Patch sets used +# with Timidity should work fine. + +gus=false +gusrate=44100 +gusbase=240 +gusirq=5 +gusdma=3 +ultradir=C:\ULTRASND + +[speaker] +# pcspeaker: Enable PC-Speaker emulation. +# pcrate: Sample rate of the PC-Speaker sound generation. +# Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716. +# tandy: Enable Tandy Sound System emulation. For 'auto', emulation is present only if machine is set to 'tandy'. +# Possible values: auto, on, off. +# tandyrate: Sample rate of the Tandy 3-Voice generation. +# Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716. +# disney: Enable Disney Sound Source emulation. (Covox Voice Master and Speech Thing compatible). + +pcspeaker=true +pcrate=44100 +tandy=auto +tandyrate=44100 +disney=true + +[joystick] +# joysticktype: Type of joystick to emulate: auto (default), none, +# 2axis (supports two joysticks), +# 4axis (supports one joystick, first joystick used), +# 4axis_2 (supports one joystick, second joystick used), +# fcs (Thrustmaster), ch (CH Flightstick). +# none disables joystick emulation. +# auto chooses emulation depending on real joystick(s). +# (Remember to reset dosbox's mapperfile if you saved it earlier) +# Possible values: auto, 2axis, 4axis, 4axis_2, fcs, ch, none. +# timed: enable timed intervals for axis. Experiment with this option, if your joystick drifts (away). +# autofire: continuously fires as long as you keep the button pressed. +# swap34: swap the 3rd and the 4th axis. Can be useful for certain joysticks. +# buttonwrap: enable button wrapping at the number of emulated buttons. + +joysticktype=auto +timed=true +autofire=false +swap34=false +buttonwrap=false + +[serial] +# serial1: set type of device connected to com port. +# Can be disabled, dummy, modem, nullmodem, directserial. +# Additional parameters must be in the same line in the form of +# parameter:value. Parameter for all types is irq (optional). +# for directserial: realport (required), rxdelay (optional). +# (realport:COM1 realport:ttyS0). +# for modem: listenport (optional). +# for nullmodem: server, rxdelay, txdelay, telnet, usedtr, +# transparent, port, inhsocket (all optional). +# Example: serial1=modem listenport:5000 +# Possible values: dummy, disabled, modem, nullmodem, directserial. +# serial2: see serial1 +# Possible values: dummy, disabled, modem, nullmodem, directserial. +# serial3: see serial1 +# Possible values: dummy, disabled, modem, nullmodem, directserial. +# serial4: see serial1 +# Possible values: dummy, disabled, modem, nullmodem, directserial. + +serial1=dummy +serial2=dummy +serial3=disabled +serial4=disabled + +[dos] +# xms: Enable XMS support. +# ems: Enable EMS support. +# umb: Enable UMB support. +# keyboardlayout: Language code of the keyboard layout (or none). + +xms=false +ems=false +umb=true +keyboardlayout=auto + +[ipx] +# ipx: Enable ipx over UDP/IP emulation. + +ipx=false + +[autoexec] +# Lines in this section will be run at startup. +# You can put your MOUNT lines here. +MOUNT C /home/jozan/docs/dosbox_home +C: +CLS +DIR |