Renamed main script

1 files changed, 657 insertions, 0 deletions

diff --git a/joes-arch-install-UEFI.sh b/joes-arch-install-UEFI.sh
new file mode 100755
index 0000000..34ed2c9
--- /dev/null
+++ b/joes-arch-install-UEFI.sh
@@ -0,0 +1,657 @@
+#!/bin/bash
+
+answr=""
+drvnm=""
+rts=""
+swps=""
+rtpwd=""
+rtrtpwd="walk"
+usrpwd=""
+usrusrpwd="fade"
+hstnm=""
+isusr="false"
+somemore="false"
+intelamdcpu="none"
+intelamdgpu="none"
+
+clear
+echo "#============ WELCOME ============#"
+echo "#                                 #"
+echo "#        Welcome to Joe's         #"
+echo "#           ARCH LINUX            #"
+echo "#      UEFI INSTALL SCRIPT        #"
+echo "#                                 #"
+echo "#  (press [return] to begin...)   #"
+echo "#                                 #"
+echo "#=================================#"
+read -r
+
+# ================================================================================================ #
+# ======================================== ERRORS CHECK ========================================== #
+# ================================================================================================ #
+
+if [ ! -r /sys/firmware/efi/efivars ]; then
+	clear
+	echo "X=X=X=X=X=X=X ERROR X=X=X=X=X=X=X=X"
+	echo "X                                 X"
+	echo "X    It seems that boot mode      X"
+	echo "X      is not set to UEFI         X"
+	echo "X    therefore Joe's script is    X"
+	echo "X        forced to abort          X"
+	echo "X                                 X"
+	echo "X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X"
+	sleep 6
+	echo && echo
+	echo "Thank you for using Joe's Arch Linux UEFI install script."
+	sleep 1
+	echo "Aborting..."
+	sleep 3
+	clear
+	exit
+fi
+clear
+echo "Verifying that your are connected to the Internet, please wait..."
+
+wget -q --spider https://google.com
+tmpret=$?
+if [ $tmpret -ne 0 ]; then
+	clear
+	echo "X=X=X=X=X=X=X ERROR X=X=X=X=X=X=X=X"
+	echo "X                                 X"
+	echo "X       It seems that your        X"
+	echo "X         terminal is not         X"
+	echo "X    connected to the Internet    X"
+	echo "X    therefore Joe's script is    X"
+	echo "X        forced to abort          X"
+	echo "X                                 X"
+	echo "X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X"
+	sleep 6
+	echo && echo
+	echo "Thank you for using Joe's Arch Linux UEFI install script."
+	sleep 1
+	echo "Aborting..."
+	sleep 3
+	clear
+	exit
+else
+	echo "Success!"
+	echo
+	echo "Press [retrun] key to continue"
+	read -r
+fi
+
+# ================================================================================================ #
+# ========================================= DISK SETUP =========================================== #
+# ================================================================================================ #
+
+while [[ $answr != y && $answr != Y && $answr != yes && $answr != Yes && $answr != YES ]]; do
+	drvnm=""
+	swps=""
+	rts=""
+	clear
+	echo "#========= I. DISK SETUP =========#"
+	echo "#                                 #"
+	echo "#      Please choose wisely       #"
+	echo "#                                 #"
+	echo "#      1. Drive to be used        #"
+	echo "#                                 #"
+	echo "#=================================#"
+	while [[ $drvnm == "" || $drvnm -gt $(lsblk | grep -c disk) || $drvnm -le 0 ]]; do
+		echo && echo
+		dn=$(lsblk | grep -c disk)
+		id=1
+		lsblk
+		echo && echo
+		echo "Please choose the drive on which Arch Linux shoud be installed:"
+		while [[ $dn != 0 ]]; do
+			echo "$id. $(lsblk | grep disk | awk '{print $1}' | sed -n "$id"p)"
+			((dn--))
+			((id++))
+		done
+		echo -n "> "
+		read -r drvnm
+		if [[ $drvnm == "" ]]; then
+			echo && echo
+			echo "Can't be empty, retrying..."
+		fi
+		if [[ $drvnm -gt $(lsblk | grep -c disk) ]]; then
+			echo && echo
+			echo "Illegal value, please choose something reasonable. Retrying..."
+		fi
+		if [[ $drvnm -lt 0 ]]; then
+			echo && echo
+			echo "Illegal value, please choose something reasonable. Retrying..."
+		fi
+		if [[ $drvnm == 0 ]]; then
+			echo && echo
+			echo "Illegal value, please choose something reasonable. Retrying..."
+		fi
+	done
+	drv="/dev/"$(lsblk | grep disk | awk '{print $1}' | sed -n "$drvnm"p)
+	clear
+	echo "#========= I. DISK SETUP =========#"
+	echo "#                                 #"
+	echo "#      Please choose wisely       #"
+	echo "#                                 #"
+	echo "#      2. swap partion size       #"
+	echo "#                                 #"
+	echo "#=================================#"
+	while [[ $swps == "" ]]; do
+		echo && echo
+		echo "Please enter your swap partition disired size:"
+		echo "_G"
+		echo -n "> "
+		read -r swps
+		if [[ $swps == "" ]]; then
+			echo && echo
+			echo "Can't be empty, retrying..."
+		fi
+	done
+	clear
+	echo "#========= I. DISK SETUP =========#"
+	echo "#                                 #"
+	echo "#      Please choose wisely       #"
+	echo "#                                 #"
+	echo "#      3. root partion size       #"
+	echo "#                                 #"
+	echo "#=================================#"
+	while [[ $rts == "" ]]; do
+		echo && echo
+		echo "Please enter your root partition disired size:"
+		echo "__G"
+		echo -n "> "
+		read -r rts
+		if [[ $rts == "" ]]; then
+			echo && echo
+			echo "Can't be empty, retrying..."
+		fi
+	done
+	btsze="128M"
+	rtsze=$rts"G"
+	swpsze=$swps"G"
+	clear
+	echo "#============= CONFIRM THIS IS CORRECT ===============#" 
+	echo "#                                                     #"
+	echo "#                DRIVE TO USE: $drv               #"
+	echo "#                                                     #"
+	echo "#  /boot/efi > BOOT partition size: $btsze              #"
+	echo "#              SWAP partition size: $swpsze                #"
+	echo "#  /         > ROOT partition size: $rtsze               #"
+	echo "#  /home     > HOME partition size: all that remains  #"
+	echo "#                                                     #"
+	echo "#=====================================================#" 
+	echo && echo
+	echo "Is that correct? [y/N]"
+	echo -n "> "
+	read -r answr
+	if [[ $answr != y && $answr != Y && $answr != yes && $answr != Yes && $answr != YES ]]; then
+		echo && echo
+		echo "Retrying..."
+		echo
+		echo "Press [retrun] key to continue"
+		read -r
+	fi
+done
+
+# ================================================================================================ #
+# ========================================= USERS SETUP ========================================== #
+# ================================================================================================ #
+
+answr="n"
+
+while [ ! $rtrtpwd = "$rtpwd" ] || [ $rtpwd = "" ]; do
+	clear
+	echo "#======= II. USERS SETUP =========#"
+	echo "#                                 #"
+	echo "#        1. root password         #"
+	echo "#                                 #"
+	echo "#=================================#"
+	echo && echo
+	echo "Enter your disired root password (can't be empty):"
+	echo -n "> "
+	read -r -s rtpwd
+	echo && echo
+	echo "Confirm root password:"
+	echo -n "> "
+	read -r -s rtrtpwd
+	if [ ! "$rtrtpwd" = "$rtpwd" ]; then
+		echo && echo
+		echo "Password mismatch, retrying..."
+		sleep 2
+	fi
+	if [ "$rtpwd" = "" ]; then
+		echo && echo
+		echo "Password is empty, retrying..."
+		sleep 2
+	fi
+done
+
+clear
+echo "#======= II. USERS SETUP =========#"
+echo "#                                 #"
+echo "#          2. User add            #"
+echo "#                                 #"
+echo "#=================================#"
+echo && echo
+echo "Would you like to add a user to the system? [y/N]"
+echo -n "> " 
+read -r answr
+if [[ $answr == y || $answr == Y || $answr == yes || $answr == Yes || $answr == YES ]]; then
+	echo && echo
+	echo "Enter your desired username:"
+	echo -n "> "
+	read -r usr
+	isusr="true"
+	usr=$(echo "$usr" | tr '[:upper:]' '[:lower:]')
+	echo && echo
+	while [[ $usrusrpwd != "$usrpwd" || $usrpwd == "" ]]; do
+		echo "Enter your disired password for $usr (can't be empty):"
+		echo -n "> "
+		read -r -s usrpwd
+		echo && echo
+		echo "Confirm user password:"
+		echo -n "> "
+		read -r -s usrusrpwd
+		if [ ! "$usrusrpwd" = "$usrpwd" ]; then
+			echo && echo
+			echo "Password mismatch, retrying..."
+			sleep 2
+		fi
+		if [ "$usrpwd" == "" ]; then
+			echo && echo
+			echo "Password is empty, retrying..."
+			sleep 2
+		fi
+	done
+fi
+clear
+echo "#======= II. USERS SETUP =========#"
+echo "#                                 #"
+echo "#          3. hostname            #"
+echo "#                                 #"
+echo "#=================================#"
+while [[ $hstnm == "" ]]; do
+	echo && echo
+	echo "Enter your disired hostname for this terminal (can't be empty):"
+	echo -n "> "
+	read -r hstnm
+	if [[ $hstnm == "" ]]; then
+		echo && echo
+		echo "Hostname is empty, retrying..."
+		sleep 2
+	fi
+done
+answr="n"
+clear
+echo "#====== III. EXTRAS SETUP ========#"
+echo "#                                 #"
+echo "#            1. More              #"
+echo "#                                 #"
+echo "#=================================#"
+echo && echo
+echo "Do you wish to install Xorg and gst-plugins as well? [y/N]"
+echo -n "> "
+read -r answr
+if [[ $answr == y || $answr == Y || $answr == yes || $answr == Yes || $answr == YES ]]; then
+	somemore="true"
+fi
+clear
+answr=""
+lscpu | grep -q Intel
+tmpret=$?
+if [ $tmpret -eq 0 ]; then
+	intelamdcpu="intel"
+fi
+lscpu | grep -q AMD
+tmpret=$?
+if [ $tmpret -eq 0 ]; then
+	intelamdcpu="amd"
+fi
+lspci | grep -q Intel
+tmpret=$?
+if [ $tmpret -eq 0 ]; then
+	intelamdgpu="intel"
+fi
+lspci | grep -q AMD
+tmpret=$?
+if [ $tmpret -eq 0 ]; then
+	intelamdgpu="amd"
+fi
+
+# ================================================================================================ #
+# ===================================== THE ACTUAL INSTALL ======================================= #
+# ================================================================================================ #
+
+
+# ============================================================== #
+# ========================== NTP DATE ========================== #
+# ============================================================== #
+
+
+clear
+echo "#====== IV. INSTALLING LINUX =====#"
+echo "#                                 #"
+echo "#        1. Setting date          #"
+echo "#             via ntp             #"
+echo "#                                 #"
+echo "#=================================#"
+timedatectl set-ntp true
+sleep 2
+
+# ============================================================== #
+# ==================== PARTITIONING DISK ======================= #
+# ============================================================== #
+
+clear
+echo "#====== IV. INSTALLING LINUX =====#"
+echo "#                                 #"
+echo "#        2. Partitionning         #"
+echo "#          disk $drv          #"
+echo "#                                 #"
+echo "#=================================#"
+echo && echo
+dd if=/dev/zero of="$drv" bs=512 count=1
+sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | fdisk "$drv"
+g	# create a new GPT partition table
+n	# new partition (/dev/sdx1)
+1	# partition number 1
+	# first sector (2048)
++$btsze	# boot size partition
+Y	# YES
+n	# new partition (/dev/sdx2)
+2	# partition number 2
+	# default start block
++$swpsze	# swap size partition
+Y	# YES
+n	# new partition (/dev/sdx3)
+3	# partition number 3
+	# default start block
++$rtsze	# root size partition
+Y	# YES
+n	# new partition (/dev/sdx4)
+4	# partition number 4
+	# default start block
+	#	all that remains
+t	# change partition type
+1	# part 1
+1	# EFI partition type
+t	# change partition type
+2	# partition number 2
+19	# swap partition type
+w	# write the partition table and quit
+EOF
+mkswap "$drv""2"
+mkfs.fat -F32 "$drv""1"
+mkfs.ext4 "$drv""3"
+mkfs.ext4 "$drv""4"
+sleep 2
+clear
+echo "#====== IV. INSTALLING LINUX =====#"
+echo "#                                 #"
+echo "#     3. Mounting partitions      #"
+echo "#                                 #"
+echo "#=================================#"
+swapon "$drv""2"
+mkdir /mnt/arch
+mount "$drv""3" /mnt/arch
+mkdir /mnt/arch/boot
+mkdir /mnt/arch/boot/efi
+mount "$drv""1" /mnt/arch/boot/efi
+mkdir /mnt/arch/home
+mount "$drv""4" /mnt/arch/home
+sleep 2
+clear
+echo "#====== IV. INSTALLING LINUX =====#"
+echo "#                                 #"
+echo "#    4. Installing base system    #"
+echo "#                                 #"
+echo "#=================================#"
+pacstrap /mnt/arch base base-devel pacman-contrib
+sleep 1
+clear
+echo "#====== IV. INSTALLING LINUX =====#"
+echo "#                                 #"
+echo "#   4.5 Installing some extras    #"
+echo "#                                 #"
+echo "#=================================#"
+pacstrap /mnt/arch zip unzip p7zip vim mc alsa-utils syslog-ng mtools dostools lsb-release ntfs-3g exfat-utils git zsh
+pacstrap /mnt/arch ntp cronie
+pacstrap /mnt/arch grub os-prober efibootmgr
+sleep 1
+clear
+echo "#====== IV. INSTALLING LINUX =====#"
+echo "#                                 #"
+echo "#       5. Generating fstab       #"
+echo "#                                 #"
+echo "#=================================#"
+genfstab -U /mnt/arch > /mnt/arch/etc/fstab
+sleep 2
+clear
+echo "#====== V. CONFIGURING LINUX =====#"
+echo "#                                 #"
+echo "#      1. Now changing root       #"
+echo "#                                 #"
+echo "#=================================#"
+sleep 2
+sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
+	clear
+	#===== V. CONFIGURING LINUX ======#
+	#                                 #
+	#      2. Setting time zone       #
+	#        to Paris, France,        #
+	#    for this is my time zone.    #
+	#  Change this later accordingly  #
+	#      to your own time zone      #
+	#    (Joe didn't find a quick     #
+	#     and easy way to ask you     #
+	#      about your time zone,      #
+	# Joe hopes your can  understand) #
+	#                                 #
+	#=================================#
+	ln -sf /usr/share/zoneinfo/Europe/Paris /etc/localtime
+	sleep 8
+	clear
+	#===== V. CONFIGURING LINUX ======#
+	#                                 #
+	#    3. Setting hardware clock    #
+	#          and ntp again          #
+	#                                 #
+	#=================================#
+	hwclock --systohc
+	ntpdate fr.pool.ntp.org
+	systemctl enable ntpd
+	sleep 1
+	clear
+	#===== V. CONFIGURING LINUX ======#
+	#                                 #
+	#        4. Localization          #
+	#          (en_US.UTF-8)          #
+	#                                 #
+	#=================================#
+	sed -i 's/#en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/' /etc/locale.gen
+	locale-gen
+	echo "LANG=en_US.UTF-8" > /etc/locale.conf
+	sleep 2
+	clear
+	#===== V. CONFIGURING LINUX ======#
+	#                                 #
+	#       5. Setting hostname       #
+	#                                 #
+	#=================================#
+	echo "$hstnm" > /etc/hostname
+	echo "127.0.0.1 localhost" > /etc/hosts
+	echo "::1 localhost" >> /etc/hosts
+	echo "127.0.1.1 $hstnm.localdomain $hstnm" >> /etc/hosts
+	sleep 2
+	clear
+	#===== V. CONFIGURING LINUX ======#
+	#                                 #
+	#     6. Setting root password    #
+	#                                 #
+	#=================================#
+	passwd
+"$rtpwd"
+"$rtpwd"
+	sleep 2
+	clear
+	#===== IV. CONFIGURING LINUX =====#
+	#                                 #
+	#     7. Setting up network       #
+	#                                 #
+	#=================================#
+	pacman -S networkmanager
+	Y
+EOF
+sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
+	systemctl enable NetworkManager
+	sleep 2
+	clear
+	#===== V. CONFIGURING LINUX ======#
+	#                                 #
+	#        8. journald stuff        #
+	#                                 #
+	#=================================#
+	sed 's/#ForwardToSyslog=no/ForwardToSyslog=yes/' /etc/systemd/journald.conf > /etc/systemd/journald.conf.42
+	mv /etc/systemd/journald.conf.42 /etc/systemd/journald.conf
+	sleep 2
+EOF
+if [[ $somemore == "true" ]]; then
+	sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
+	clear
+	#===== V. CONFIGURING LINUX ======#
+	#                                 #
+	#         9. Installing           #
+	#        some more utils          #
+	#     (gst plugins, xorg...)      #
+	#                                 #
+	#=================================#
+	pacman -S gst-plugins-{base,good,bad,ugly} gst-libav xorg-{server,xinit,apps} xf86-input-{mouse,keyboard} xdg-user-dirs mesa xf86-video-vesa
+
+	Y
+EOF
+fi
+if [[ $intelamdgpu == "intel" && $somemore == "true" ]]; then
+	sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
+	sleep 2
+	clear
+	#===== V. CONFIGURING LINUX ======#
+	#                                 #
+	#        9.5 Installing           #
+	#        some more utils          #
+	#         (xf86-video)            #
+	#                                 #
+	#=================================#
+	pacman -S xf86-video-intel
+	Y
+	sleep 2
+EOF
+fi
+if [[ $intelamdgpu == "amd" && $somemore == "true" ]]; then
+	sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
+	sleep 2
+	clear
+	#===== V. CONFIGURING LINUX ======#
+	#                                 #
+	#        9.5 Installing           #
+	#        some more utils          #
+	#         (xf86-video)            #
+	#                                 #
+	#=================================#
+	pacman -S xf86-video-amdgpu
+	Y
+EOF
+fi
+if [[ $isusr == "true" ]]; then
+	sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
+	sleep 2
+	clear
+	#===== V. CONFIGURING LINUX ======#
+	#                                 #
+	#      10. Installing sudo        #
+	#                                 #
+	#=================================#
+	pacman -S sudo
+	Y
+EOF
+sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
+	sleep 2
+	clear
+	#===== V. CONFIGURING LINUX ======#
+	#                                 #
+	#      11. Generating user        #
+	#                                 #
+	#=================================#
+	useradd -m -g wheel -s /bin/zsh $usr
+	passwd $usr
+$usrpwd
+$usrpwd
+	sed 's/# %wheel ALL=(ALL) ALL/%wheel ALL=(ALL) ALL/' /etc/sudoers > /etc/sudoers.42
+	mv /etc/sudoers.42 /etc/sudoers
+	sleep 2
+	exit
+EOF
+fi
+if [[ $intelamdcpu == "intel" ]]; then
+	sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
+	clear
+	#===== V. CONFIGURING LINUX ======#
+	#                                 #
+	#      12. Installing CPU         #
+	#           microcode             #
+	#                                 #
+	#=================================#
+	pacman -S intel-ucode
+	Y
+EOF
+fi
+if [[ $intelamdcpu == "amd" ]]; then
+	sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
+	clear
+	#===== V. CONFIGURING LINUX ======#
+	#                                 #
+	#      12. Installing CPU         #
+	#           microcode             #
+	#                                 #
+	#=================================#
+	pacman -S amd-ucode
+	Y
+EOF
+fi
+sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
+	sleep 2
+	clear
+	#===== VI. CONFIGURING BOOT ======#
+	#                                 #
+	#   1. Generating Kernel image    #
+	#                                 #
+	#=================================#
+	mkinitcpio -p linux
+	sleep 1
+	clear
+	#===== VI. CONFIGURING BOOT ======#
+	#                                 #
+	#       2. Configuring GRUB       #
+	#                                 #
+	#=================================#
+	grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=arch_grub --recheck
+	grub-mkconfig -o /boot/grub/grub.cfg
+	sleep 4
+	exit
+EOF
+echo && echo
+clear
+echo "#========= WORK COMPLETE =========#"
+echo "#                                 #"
+echo "#     Your system should now      #"
+echo "#         be installed.           #"
+echo "#   Thank your for using Joe's    #"
+echo "#           ARCH LINUX            #"
+echo "#      UEFI INSTALL UTILITY       #"
+echo "#                                 #"
+echo "#   Your system will now reboot   #"
+echo "#                                 #"
+echo "#=================================#"
+echo && echo
+sleep 10
+umount -R /mnt/arch
+reboot