Renamed the script for obvious reasons

1 files changed, 0 insertions, 849 deletions

diff --git a/joes-arch-install-UEFI.sh b/joes-arch-install-UEFI.sh
deleted file mode 100755
index bc2fdc6..0000000
--- a/joes-arch-install-UEFI.sh
+++ /dev/null
@@ -1,849 +0,0 @@
-#!/bin/bash
-
-#==================================================================================================#
-#------------------------------------ VARIABLES DECLARATION ---------------------------------------#
-#==================================================================================================#
-answr=""
-drvnm=""
-rts=""
-swps=""
-rtpwd=""
-rtrtpwd="walk"
-usrpwd=""
-usrusrpwd="fade"
-hstnm=""
-isusr=false
-somemore=false
-intelamdcpu="none"
-intelamdgpu="none"
-ltskern=true
-numregex='^[0-9]+$'
-gogogo=false
-if [ ! -r /sys/firmware/efi/efivars ]; then
-	efimode=false
-else
-	efimode=true
-fi
-#==================================================================================================#
-#--------------------------------------- COLORS DECLARATION ---------------------------------------#
-#==================================================================================================#
-#NBLACK="\033[0;30m"
-#NRED="\033[0;31m"
-#NGREEN="\033[0;32m"
-#NYELLOW="\033[0;33m"
-#NBLUE="\033[0;34m"
-#NMAGENTA="\033[0;35m"
-#NCYAN="\033[0;36m"
-#NWHITE="\033[0;37m"
-
-#BBLACK="\033[1;30m"
-BRED="\033[1;31m"
-BGREEN="\033[1;32m"
-BYELLOW="\033[1;33m"
-BBLUE="\033[1;34m"
-BMAGENTA="\033[1;35m"
-BCYAN="\033[1;36m"
-#BWHITE="\033[1;37m"
-
-END="\033[0;0m"
-#==================================================================================================#
-#--------------------------------------- SOME FUNCTIONS -------------------------------------------#
-#==================================================================================================#
-jo_goodbye() {
-	echo && echo
-	echo -e "${BCYAN}Thank you for using Joe's Arch Linux UEFI install script.${END}"
-	sleep 1
-	echo -e "${BCYAN}Aborting...${END}"
-	sleep 3
-	clear
-	exit
-}
-
-jo_pacstrap() {
-	echo
-	echo -e "${BCYAN}Installing ${BYELLOW}$1${END}"
-	if pacstrap /mnt/arch "$1" > /dev/null; then
-		echo -e "${BGREEN}$1 installed${END}"
-	fi
-}
-#==================================================================================================#
-#--------------------------------------------- START ----------------------------------------------#
-#==================================================================================================#
-clear
-echo -e "${BMAGENTA}\
-#============ WELCOME ============#
-#                                 #
-#        Welcome to Joe's         #
-#           ARCH LINUX            #
-#      UEFI INSTALL SCRIPT        #
-#                                 #
-#  (press ${BYELLOW}[return] ${BMAGENTA}to begin...)   #
-#                                 #
-#=================================#${END}"
-read -r
-#==================================================================================================#
-#----------------------------------------- ERRORS CHECK -------------------------------------------#
-#==================================================================================================#
-clear
-echo -e "${BCYAN}Verifying that your are connected to the Internet, please wait...${END}"
-if ! wget -q --spider https://www.archlinux.org/; then
-	clear
-	echo -e "${BRED}\
-X=X=X=X=X=X=X ERROR X=X=X=X=X=X=X=X
-X                                 X
-X       It seems that your        X
-X         terminal is not         X
-X    connected to the Internet    X
-X    therefore Joe's script is    X
-X        forced to abort          X
-X                                 X
-X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X${END}"
-	sleep 6
-	jo_goodbye
-else
-	echo -e "${BGREEN}Success!${END}"
-	echo
-	echo -e "${BCYAN}Press ${BYELLOW}[retrun] ${BCYAN}key to continue${END}"
-	read -r
-fi
-#==================================================================================================#
-#------------------------------------------ DISK SETUP --------------------------------------------#
-#==================================================================================================#
-while [[ $answr != y && $answr != Y && $answr != yes && $answr != Yes && $answr != YES ]]; do
-	drvnm=""
-	swps=""
-	rts=""
-	clear
-	echo -e "${BMAGENTA}\
-#========= I. DISK SETUP =========#
-#                                 #
-#      Please choose wisely       #
-#                                 #
-#      1. Drive to be used        #
-#                                 #
-#=================================#${END}"
-	while [[ $drvnm == "" || $drvnm -gt $(lsblk | grep -c disk) || $drvnm -le 0 ]]; do
-		echo && echo
-		dn=$(lsblk | grep -c disk)
-		id=1
-		echo -e "${BBLUE}DISK  |  SIZE\n------+--------${END}"
-		lsblk | grep disk | awk '{print "\033[1;36m"$1 "\033[1;34m   | ", "\033[1;33m"$4;}'
-		echo && echo
-		echo -e "${BCYAN}Please choose the ${BYELLOW}drive ${BCYAN}on which Arch Linux shoud be installed:${END}"
-		while [[ $dn != 0 ]]; do
-			echo -e "${BYELLOW}$id. $(lsblk | grep disk | awk '{print "\033[1;36m"$1"\033[0m";}' | sed -n "$id"p)"
-			((dn--))
-			((id++))
-		done
-		echo -n -e "${BYELLOW}> "
-		read -r drvnm
-		if [ "$drvnm" = "" ]; then
-			echo && echo
-			echo -e "${BRED}Can't be empty, retrying...${END}"
-		elif ! [[ $drvnm =~ $numregex ]]; then
-			echo && echo
-			echo -e "${BRED}Illegal value, please choose something reasonable. Retrying...${END}"
-		elif [ "$drvnm" -gt "$(lsblk | grep -c disk)" ]; then
-			echo && echo
-			echo -e "${BRED}Illegal value, please choose something reasonable. Retrying...${END}"
-		elif [ "$drvnm" -le 0 ]; then
-			echo && echo
-			echo -e "${BRED}Illegal value, please choose something reasonable. Retrying...${END}"
-		fi
-	done
-	drv="/dev/"$(lsblk | grep disk | awk '{print $1}' | sed -n "$drvnm"p)
-	clear
-	echo -e "${BMAGENTA}\
-#========= I. DISK SETUP =========#
-#                                 #
-#      Please choose wisely       #
-#                                 #
-#      2. swap partion size       #
-#                                 #
-#=================================#${END}"
-	while [ "$gogogo" = false ]; do
-		echo && echo
-		echo -e "${BCYAN}\
-Please enter your ${BYELLOW}swap partition ${BCYAN}disired size:
-__G"
-		echo -n -e "${BYELLOW}> "
-		read -r swps
-		if [[ $swps == "" ]]; then
-			echo && echo
-			echo -e "${BRED}Can't be empty, retrying...${END}"
-			gogogo=false
-		elif ! [[ $swps =~ $numregex ]]; then
-			echo && echo
-			echo -e "${BRED}Illegal value, please choose something reasonable. Retrying...${END}"
-			gogogo=false
-		else
-			gogogo=true
-		fi
-	done
-	gogogo=false
-	clear
-	echo -e "${BMAGENTA}\
-#========= I. DISK SETUP =========#
-#                                 #
-#      Please choose wisely       #
-#                                 #
-#      3. root partion size       #
-#                                 #
-#=================================#"
-	while [ "$gogogo" = false ]; do
-		echo && echo
-		echo -e "${BCYAN}\
-Please enter your ${BYELLOW}root partition ${BCYAN}disired size:
-__G"
-		echo -n -e "${BYELLOW}> "
-		read -r rts
-		if [[ $rts == "" ]]; then
-			echo && echo
-			echo -e "${BRED}Can't be empty, retrying...${END}"
-			gogogo=false
-		elif ! [[ $rts =~ $numregex ]]; then
-			echo && echo
-			echo -e "${BRED}Illegal value, please choose something reasonable. Retrying...${END}"
-			gogogo=false
-		else
-			gogogo=true
-		fi
-	done
-	gogogo=false
-	btsze="128M"
-	rtsze=$rts"G"
-	swpsze=$swps"G"
-	clear
-	echo -e "${BMAGENTA}\
-#============= CONFIRM THIS IS CORRECT ===============#
-#                                                     #
-#                DRIVE TO USE: ${BCYAN}$drv               ${BMAGENTA}#
-#                                                     #
-#  /boot/efi > BOOT partition size: ${BYELLOW}$btsze              ${BMAGENTA}#"
-if [ "$swps" -ge 10 ]; then
-	echo -e "#              SWAP partition size: ${BYELLOW}$swpsze               ${BMAGENTA}#"
-else
-	echo -e "#              SWAP partition size: ${BYELLOW}$swpsze                ${BMAGENTA}#"
-fi
-if [ "$rts" -ge 100 ]; then
-	echo -e "#  /         > ROOT partition size: ${BYELLOW}$rtsze              ${BMAGENTA}#"
-elif [ "$rts" -ge 10 ]; then
-	echo -e "#  /         > ROOT partition size: ${BYELLOW}$rtsze               ${BMAGENTA}#"
-else
-	echo -e "#  /         > ROOT partition size: ${BYELLOW}$rtsze                ${BMAGENTA}#"
-fi
-echo -e "#  /home     > HOME partition size: ${BYELLOW}all that remains  ${BMAGENTA}#
-#                                                     #
-#=====================================================#${END}"
-	echo && echo
-	echo -e "${BCYAN}Is that correct? [${BGREEN}y${BCYAN}/${BRED}N${BCYAN}]"
-	echo -n -e "${BYELLOW}> "
-	read -r answr
-	if [[ $answr != y && $answr != Y && $answr != yes && $answr != Yes && $answr != YES ]]; then
-		echo && echo
-		echo -e "${BCYAN}Retrying..."
-		echo
-		echo -e "Press ${BYELLOW}[retrun] ${BCYAN}key to continue${END}"
-		read -r
-	fi
-done
-
-answr="n"
-while [[ $answr != y && $answr != Y && $answr != yes && $answr != Yes && $answr != YES ]]; do
-	echo && echo
-	echo -e "${BRED}Disk ${BYELLOW}$drv ${BRED}will be wiped. Are you sure you want to continue? [${BGREEN}y${BRED}/${BRED}N${BRED}]${END}"
-	echo -n -e "${BRED}> "
-	read -r answr
-	if [[ $answr != y && $answr != Y && $answr != yes && $answr != Yes && $answr != YES ]]; then
-		jo_goodbye
-	fi
-done
-#==================================================================================================#
-#------------------------------------ USERS AND ROOT SETUP ----------------------------------------#
-#==================================================================================================#
-answr="n"
-
-while [[ $rtrtpwd != "$rtpwd" || $rtpwd == "" ]]; do
-	clear
-	echo -e "${BMAGENTA}\
-#======= II. USERS SETUP =========#
-#                                 #
-#        1. root password         #
-#                                 #
-#=================================#${END}"
-	echo && echo
-	echo -e "${BCYAN}Enter your disired ${BYELLOW}root password ${BCYAN}(can't be empty):"
-	echo -n -e "${BYELLOW}> "
-	read -r -s rtpwd
-	echo && echo
-	echo -e "${BCYAN}Confirm ${BYELLOW}root password${BCYAN}:"
-	echo -n -e "${BYELLOW}> "
-	read -r -s rtrtpwd
-	if [[ $rtrtpwd != "$rtpwd" ]]; then
-		echo && echo
-		echo -e "${BRED}Password mismatch, retrying...${END}"
-		sleep 2
-	fi
-	if [[ $rtpwd = "" ]]; then
-		echo && echo
-		echo -e "${BRED}Password is empty, retrying...${END}"
-		sleep 2
-	fi
-done
-
-clear
-echo -e "${BMAGENTA}\
-#======= II. USERS SETUP =========#
-#                                 #
-#          2. User add            #
-#                                 #
-#=================================#${END}"
-echo && echo
-echo -e "${BCYAN}Would you like to add a user to the system? (will automatically receive sudo rights) [${BGREEN}y${BCYAN}/${BRED}N${BCYAN}]"
-echo -n -e "${BYELLOW}> " 
-read -r answr
-if [[ $answr == y || $answr == Y || $answr == yes || $answr == Yes || $answr == YES ]]; then
-	echo && echo
-	echo -e "${BCYAN}Enter your desired ${BYELLOW}username:"
-	echo -n -e "${BYELLOW}> "
-	read -r usr
-	isusr=true
-	usr=$(echo "$usr" | tr '[:upper:]' '[:lower:]')
-	echo && echo
-	while [[ $usrusrpwd != "$usrpwd" || $usrpwd == "" ]]; do
-		echo -e "${BCYAN}Enter your disired ${BYELLOW}password ${BCYAN}for ${BYELLOW}$usr${BCYAN} (can't be empty):"
-		echo -n -e "${BYELLOW}> "
-		read -r -s usrpwd
-		echo && echo
-		echo -e "${BCYAN}Confirm ${BYELLOW}user password:${BCYAN}"
-		echo -n -e "${BYELLOW}> "
-		read -r -s usrusrpwd
-		if [[ $usrusrpwd != "$usrpwd" ]]; then
-			echo && echo
-			echo -e "${BRED}Password mismatch, retrying...${END}"
-			sleep 2
-		fi
-		if [[ $usrpwd == "" ]]; then
-			echo && echo
-			echo -e "${BRED}Password is empty, retrying...${END}"
-			sleep 2
-		fi
-	done
-fi
-clear
-#==================================================================================================#
-#---------------------------------------- HOSTNAME SETUP ------------------------------------------#
-#==================================================================================================#
-echo -e "${BMAGENTA}\
-#======= II. USERS SETUP =========#
-#                                 #
-#          3. hostname            #
-#                                 #
-#=================================#${END}"
-while [[ $hstnm == "" ]]; do
-	echo && echo
-	echo -e "${BCYAN}Enter your disired ${BYELLOW}hostname ${BCYAN}for this terminal (can't be empty):"
-	echo -n -e "${BYELLOW}> "
-	read -r hstnm
-	if [[ $hstnm == "" ]]; then
-		echo && echo
-		echo -e "${BRED}Hostname is empty, retrying...${END}"
-		sleep 2
-	fi
-done
-answr="n"
-clear
-#==================================================================================================#
-#------------------------------------ LTS AND XORG SETUP ------------------------------------------#
-#==================================================================================================#
-echo -e "${BMAGENTA}\
-#====== III. EXTRAS SETUP ========#
-#                                 #
-#            1. More              #
-#                                 #
-#=================================#${END}"
-echo && echo
-echo -e "${BCYAN}Do you wish to install an ${BYELLOW}LTS Kernel${BCYAN}? [${BGREEN}Y${BCYAN}/${BRED}n${BCYAN}]"
-echo -n -e "${BYELLOW}> "
-read -r answr
-if [[ $answr == n || $answr == N || $answr == no || $answr == No || $answr == NO ]]; then
-	ltskern=false
-fi
-answr=""
-echo && echo
-echo -e "${BCYAN}Do you wish to install ${BYELLOW}Xorg ${BCYAN}and ${BYELLOW}gst-plugins ${BCYAN}as well? [${BGREEN}y${BCYAN}/${BRED}N${BCYAN}]"
-echo -n -e "${BYELLOW}> "
-read -r answr
-if [[ $answr == y || $answr == Y || $answr == yes || $answr == Yes || $answr == YES ]]; then
-	somemore=true
-fi
-clear
-answr=""
-#==================================================================================================#
-#-------------------------------------- THE ACTUAL INSTALL ----------------------------------------#
-#==================================================================================================#
-#================================================================#
-#--------------------------- NTP DATE ---------------------------#
-#================================================================#
-clear
-echo -e "${BMAGENTA}\
-#====== IV. INSTALLING LINUX =====#
-#                                 #
-#        1. Setting date          #
-#             via ntp             #
-#                                 #
-#=================================#${END}"
-timedatectl set-ntp true > /dev/null
-sleep 2
-#================================================================#
-#------------------------- WIPING DISK --------------------------#
-#================================================================#
-clear
-echo -e "${BMAGENTA}\
-#====== IV. INSTALLING LINUX =====#
-#                                 #
-#        2. Partitionning         #
-#          disk $drv          #
-#                                 #
-#=================================#${END}"
-echo && echo
-echo -e "${BCYAN}Wiping disk. This step may take a while.${END}"
-basepartc=$(lsblk "$drv" | grep -c part)
-if [ "$basepartc" -ge 1 ]; then
-	i=1
-	while [[ $i -le $basepartc ]]; do
-		towipe=$(lsblk "$drv" | grep part | awk '{print $1}' | rev | cut -c -1 | rev | awk "NR==$i")
-		echo -e "${BCYAN}Wiping $drv$towipe...${END}"
-		dd if=/dev/zero of="$drv$towipe" bs=1M status=progress > /dev/null 2>&1
-		((i++))
-	done
-else
-	echo -e "${BCYAN}Wiping $drv...${END}"
-	dd if=/dev/zero of="$drv" bs=1M status=progress > /dev/null 2>&1
-fi
-wipefs --all --force "$drv"
-echo && echo
-echo -e "${BGREEN}Wiping complete.${END}"
-#================================================================#
-#--------------------- PARTITIONING DISK ------------------------#
-#================================================================#
-if [ "$efimode" = true ]; then
-	fdisk "$drv" << FDISK_EFI_INPUT
-g
-n
-1
-
-+$btsze
-n
-2
-
-+$swpsze
-n
-3
-
-+$rtsze
-n
-4
-
-
-t
-2
-19
-w
-FDISK_EFI_INPUT
-else
-	fdisk "$drv" << FDISK_BIOS_INPUT
-o
-n
-p
-1
-
-+$btsze
-n
-p
-2
-
-+$swpsze
-n
-p
-3
-
-+$rtsze
-n
-p
-
-
-w
-FDISK_BIOS_INPUT
-fi
-if [ "$efimode" = true ]; then
-	mkfs.fat -F32 "$drv""1" > /dev/null
-else
-	mkfs.ext2 "$drv""1" > /dev/null
-fi
-mkswap "$drv""2" > /dev/null
-mkfs.ext4 "$drv""3" > /dev/null
-mkfs.ext4 "$drv""4" > /dev/null
-sleep 2
-clear
-#================================================================#
-#---------------------- MOUNT PARTITIONS ------------------------#
-#================================================================#
-echo -e "${BMAGENTA}\
-#====== IV. INSTALLING LINUX =====#
-#                                 #
-#     3. Mounting partitions      #
-#                                 #
-#=================================#${END}"
-mkdir /mnt/arch > /dev/null
-swapon "$drv""2" > /dev/null
-mount "$drv""3" /mnt/arch > /dev/null
-mkdir /mnt/arch/boot > /dev/null
-mkdir /mnt/arch/boot/efi > /dev/null
-if [ "$efimode" = true ]; then
-	mount "$drv""1" /mnt/arch/boot/efi > /dev/null
-else
-	mount "$drv""1" /mnt/arch/boot > /dev/null
-fi
-mkdir /mnt/arch/home > /dev/null
-mount "$drv""4" /mnt/arch/home > /dev/null
-sleep 2
-clear
-#================================================================#
-#------------------------ BASE DOWNLOAD -------------------------#
-#================================================================#
-echo -e "${BMAGENTA}\
-#====== IV. INSTALLING LINUX =====#
-#                                 #
-#  4. Downloading base packages   #
-#                                 #
-#       Please be patient,        #
-#      this may take a while      #
-#                                 #
-#=================================#${END}"
-echo
-jo_pacstrap base
-jo_pacstrap base-devel
-jo_pacstrap pacman-contrib
-echo && echo
-echo -e "${BGREEN}Base packages installed${END}"
-sleep 4
-clear
-#================================================================#
-#----------------------- UTILS DOWNLOAD -------------------------#
-#================================================================#
-echo -e "${BMAGENTA}\
-#====== IV. INSTALLING LINUX =====#
-#                                 #
-#  5. Installing useful packages  #
-#      so you don't have to       #
-#                                 #
-#=================================#${END}"
-echo
-jo_pacstrap zip
-jo_pacstrap unzip
-jo_pacstrap p7zip
-jo_pacstrap networkmanager
-jo_pacstrap vim
-jo_pacstrap mc
-jo_pacstrap alsa-utils
-jo_pacstrap syslog-ng
-jo_pacstrap mtools
-jo_pacstrap dostools
-jo_pacstrap lsb-release
-jo_pacstrap ntfs-3g
-jo_pacstrap exfat-utils
-jo_pacstrap git
-jo_pacstrap zsh
-jo_pacstrap ntp
-jo_pacstrap cronie
-jo_pacstrap grub
-jo_pacstrap os-prober
-jo_pacstrap efibootmgr
-jo_pacstrap mkinitcpio
-if [ "$ltskern" = true ]; then
-	jo_pacstrap linux-lts
-	jo_pacstrap linux-lts-headers
-else
-	jo_pacstrap linux
-	linux-headers
-fi
-echo && echo
-echo -e "${BGREEN}Utils installed.${END}"
-sleep 4
-#================================================================#
-#------------------------ EXTRA DOWNLOAD ------------------------#
-#================================================================#
-if [ "$somemore" = true ]; then
-	clear
-	echo -e "${BMAGENTA}\
-#====== IV. INSTALLING LINUX =====#
-#                                 #
-#         5.5 Installing          #
-#        some more utils          #
-#     (${BYELLOW}gst plugins${BMAGENTA}, ${BYELLOW}Xorg...)      ${BMAGENTA}#
-#                                 #
-#=================================#${END}"
-	echo
-	jo_pacstrap gst-plugins-{base,good,bad,ugly}
-	jo_pacstrap gst-libav
-	jo_pacstrap xorg-{server,xinit,apps}
-	jo_pacstrap xf86-input-{mouse,keyboard}
-	jo_pacstrap xdg-user-dirs
-	jo_pacstrap mesa
-	echo && echo
-	echo -e "${BGREEN}Extra packages installed.${END}"
-	sleep 4
-fi
-if lscpu | grep -q Intel; then
-	intelamdcpu="intel"
-elif lscpu | grep -q AMD; then
-	intelamdcpu="amd"
-fi
-if lspci | grep -q Intel; then
-	intelamdgpu="intel"
-elif lspci | grep -q AMD; then
-	intelamdgpu="amd"
-fi
-#================================================================#
-#--------------------- GPU DRIVERS DOWNLOAD ---------------------#
-#================================================================#
-if [[ $intelamdgpu == "intel" && "$somemore" = true ]]; then
-	clear
-	echo -e "${BMAGENTA}\
-#====== IV. INSTALLING LINUX =====#
-#                                 #
-#        5.5 Installing           #
-#        some more utils          #
-#         (${BYELLOW}xf86-video${BMAGENTA})            #
-#                                 #
-#=================================#${END}"
-	echo
-	jo_pacstrap xf86-video-intel
-fi
-sleep 2
-if [[ $intelamdgpu == "amd" && "$somemore" = true ]]; then
-	sleep 2
-	clear
-	echo -e "${BMAGENTA}\
-#====== IV. INSTALLING LINUX =====#
-#                                 #
-#        5.5 Installing           #
-#        some more utils          #
-#         (${BYELLOW}xf86-video${BMAGENTA})            #
-#                                 #
-#=================================#${END}"
-	echo
-	jo_pacstrap xf86-video-amdgpu
-fi
-#================================================================#
-#-------------------- CPU MICROCODE DOWNLOAD --------------------#
-#================================================================#
-if [[ $intelamdcpu == "intel" ]]; then
-	clear
-	echo -e "${BMAGENTA}\
-#====== IV. INSTALLING LINUX =====#
-#                                 #
-#       6. Installing CPU         #
-#           microcode             #
-#                                 #
-#=================================#${END}"
-	echo
-	jo_pacstrap intel-ucode
-fi
-if [[ $intelamdcpu == "amd" ]]; then
-	clear
-	echo -e "${BMAGENTA}\
-#====== IV. INSTALLING LINUX =====#
-#                                 #
-#       6. Installing CPU         #
-#           microcode             #
-#                                 #
-#=================================#${END}"
-	echo
-	jo_pacstrap amd-ucode
-fi
-sleep 2
-#================================================================#
-#------------------------ FSTAB CONFIG  -------------------------#
-#================================================================#
-clear
-echo -e "${BMAGENTA}\
-#====== IV. INSTALLING LINUX =====#
-#                                 #
-#       7. Generating fstab       #
-#                                 #
-#=================================#${END}"
-genfstab -U -p /mnt/arch > /mnt/arch/etc/fstab
-sleep 2
-#================================================================#
-#------------------------- ARCH-CHROOT --------------------------#
-#================================================================#
-clear
-echo -e "${BMAGENTA}\
-#====== V. CONFIGURING LINUX =====#
-#                                 #
-#      1. Now changing root       #
-#                                 #
-#=================================#${END}"
-echo -e "${BBLUE}"
-sleep 2
-arch-chroot /mnt/arch << ARCH_CHROOT_CMDS
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#      2. Setting time zone       #
-	#        to Paris, France,        #
-	#    for this is my time zone.    #
-	#  Change this later accordingly  #
-	#      to your own time zone      #
-	#    (Joe didn't find a quick     #
-	#     and easy way to ask you     #
-	#      about your time zone,      #
-	# Joe hopes your can  understand) #
-	#                                 #
-	#=================================#
-	ln -sf /usr/share/zoneinfo/Europe/Paris /etc/localtime
-	sleep 8
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#    3. Setting hardware clock    #
-	#          and ntp again          #
-	#                                 #
-	#=================================#
-	hwclock --systohc
-	sleep 1
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#        4. Localization          #
-	#          (en_US.UTF-8)          #
-	#                                 #
-	#=================================#
-	sed -i 's/#en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/' /etc/locale.gen
-	locale-gen
-	echo "LANG=en_US.UTF-8" > /etc/locale.conf
-	sleep 2
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#       5. Setting hostname       #
-	#                                 #
-	#=================================#
-	echo "$hstnm" > /etc/hostname
-	echo "127.0.0.1 localhost" > /etc/hosts
-	echo "::1 localhost" >> /etc/hosts
-	echo "127.0.1.1 $hstnm.localdomain $hstnm" >> /etc/hosts
-	sleep 2
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#     6. Setting root password    #
-	#                                 #
-	#=================================#
-	passwd
-$rtpwd
-$rtpwd
-	systemctl enable NetworkManager
-	sleep 2
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#        7. journald stuff        #
-	#                                 #
-	#=================================#
-	sed -i 's/#ForwardToSyslog=no/ForwardToSyslog=yes/' /etc/systemd/journald.conf
-	sleep 2
-ARCH_CHROOT_CMDS
-if [ "$isusr" = true ]; then
-arch-chroot /mnt/arch << ARCH_CHROOT_CMDS
-	sleep 2
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#       9. Generating user        #
-	#                                 #
-	#=================================#
-	useradd -m -g wheel -s /bin/zsh $usr
-	passwd $usr
-$usrpwd
-$usrpwd
-	sed -i 's/# %wheel ALL=(ALL) ALL/%wheel ALL=(ALL) ALL/' /etc/sudoers
-	sleep 2
-	exit
-ARCH_CHROOT_CMDS
-fi
-if [ "$ltskern" = false ]; then
-	arch-chroot /mnt/arch << ARCH_CHROOT_CMDS
-	clear
-	#===== VI. CONFIGURING BOOT ======#
-	#                                 #
-	#    1. Configuring the Kernel    #
-	#                                 #
-	#=================================#
-	mkinitcpio -p linux
-ARCH_CHROOT_CMDS
-else
-	arch-chroot /mnt/arch << ARCH_CHROOT_CMDS
-	clear
-	#===== VI. CONFIGURING BOOT ======#
-	#                                 #
-	#    1. Configuring the Kernel    #
-	#                                 #
-	#=================================#
-	mkinitcpio -p linux-lts
-ARCH_CHROOT_CMDS
-fi
-echo -e "${BBLUE}"
-sleep 2
-if [ "$efimode" = true ]; then
-arch-chroot /mnt/arch << ARCH_CHROOT_EFI_GRUB_CMDS
-	clear
-	#===== VI. CONFIGURING BOOT ======#
-	#                                 #
-	#       2. Configuring GRUB       #
-	#                                 #
-	#=================================#
-	grub-install --target=x86_64-efi --bootloader-id=GRUB --efi-directory=/boot/efi --recheck
-	mkdir -p /boot/grub
-	grub-mkconfig -o /boot/grub/grub.cfg
-	mkdir -p /boot/efi/EFI/BOOT
-	cp /boot/efi/EFI/GRUB/grubx64.efi /boot/efi/EFI/BOOT/BOOTX64.EFI
-	echo "bcf boot add 1 fs0:\\EFI\\GRUB\\grubx64.efi \"GRUB bootloader\"" > /boot/efi/startup.nsh
-	echo "exit" >> /boot/efi/startup.nsh
-	sleep 4
-	exit
-ARCH_CHROOT_EFI_GRUB_CMDS
-else
-arch-chroot /mnt/arch << ARCH_CHROOT_BIOS_GRUB_CMDS
-	clear
-	#===== VI. CONFIGURING BOOT ======#
-	#                                 #
-	#       2. Configuring GRUB       #
-	#                                 #
-	#=================================#
-	grub-install --target=i386-pc $drv
-	grub-mkconfig -o /boot/grub/grub.cfg
-	sleep 4
-	exit
-ARCH_CHROOT_BIOS_GRUB_CMDS
-fi
-echo && echo
-clear
-echo -e "${BMAGENTA}\
-#========= ${BGREEN}WORK COMPLETE ${BMAGENTA}=========#
-#                                 #
-#     Your system should now      #
-#         be installed.           #
-#   Thank your for using Joe's    #
-#           ARCH LINUX            #
-#      UEFI INSTALL UTILITY       #
-#                                 #
-#   Your system will now reboot   #
-#                                 #
-#=================================#${END}"
-echo && echo
-sleep 10
-umount -R /mnt/arch
-reboot