Few renames

1 files changed, 0 insertions, 650 deletions

diff --git a/arch_install-UEFI.sh b/arch_install-UEFI.sh
deleted file mode 100644
index 332a19c..0000000
--- a/arch_install-UEFI.sh
+++ /dev/null
@@ -1,650 +0,0 @@
-#!/bin/bash
-
-answr=""
-drvnm=""
-rts=""
-swps=""
-rtpwd=""
-rtrtpwd="walk"
-usrpwd=""
-usrusrpwd="fade"
-hstnm=""
-isusr="false"
-somemore="false"
-intelamdcpu="none"
-intelamdgpu="none"
-did=""
-
-clear
-echo "#============ WELCOME ============#"
-echo "#                                 #"
-echo "#        Welcome to Joe's         #"
-echo "#           ARCH LINUX            #"
-echo "#      UEFI INSTALL SCRIPT        #"
-echo "#                                 #"
-echo "#  (press [return] to begin...)   #"
-echo "#                                 #"
-echo "#=================================#"
-read
-
-# ================================================================================================ #
-# ======================================== ERRORS CHECK ========================================== #
-# ================================================================================================ #
-
-if [ ! -r /sys/firmware/efi/efivars ]; then
-				clear
-				echo "X=X=X=X=X=X=X ERROR X=X=X=X=X=X=X=X"
-				echo "X                                 X"
-				echo "X    It seems that boot mode      X"
-				echo "X      is not set to UEFI         X"
-				echo "X    therefore Joe's script is    X"
-				echo "X        forced to abort          X"
-				echo "X                                 X"
-				echo "X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X"
-				sleep 6
-				echo && echo
-				echo "Thank you for using Joe's Arch Linux UEFI install scritpt."
-				sleep 1
-				echo "Aborting..."
-				sleep 3
-				clear
-				exit
-fi
-clear
-echo "Verifying that your are connected to the Internet, please wait..."
-wget -q --spider https://google.com
-if [ ! $? -eq 0 ]; then
-				clear
-				echo "X=X=X=X=X=X=X ERROR X=X=X=X=X=X=X=X"
-				echo "X                                 X"
-				echo "X       It seems that your        X"
-				echo "X         terminal is not         X"
-				echo "X    connected to the Internet    X"
-				echo "X    therefore Joe's script is    X"
-				echo "X        forced to abort          X"
-				echo "X                                 X"
-				echo "X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X=X"
-				sleep 6
-				echo && echo
-				echo "Thank you for using Joe's Arch Linux UEFI install script."
-				sleep 1
-				echo "Aborting..."
-				sleep 3
-				clear
-				exit
-else
-				echo "Success!"
-				echo
-				echo "Press [retrun] key to continue"
-				read
-fi
-
-# ================================================================================================ #
-# ========================================= DISK SETUP =========================================== #
-# ================================================================================================ #
-
-while [[ $answr != y && $answr != Y && $answr != yes && $answr != Yes && $answr != YES ]]; do
-				drvnm=""
-				swps=""
-				rts=""
-				clear
-				echo "#========= I. DISK SETUP =========#"
-				echo "#                                 #"
-				echo "#      Please choose wisely       #"
-				echo "#                                 #"
-				echo "#      1. Drive to be used        #"
-				echo "#                                 #"
-				echo "#=================================#"
- 				while [[ $drvnm == "" || $drvnm -gt $(lsblk | grep disk | wc -l) || $drvnm -le 0 ]]; do
-					echo && echo
-					dn=$(lsblk | grep disk | wc -l)
-					id=1
-					lsblk
-					echo && echo
-					echo "Please choose the drive on which Arch Linux shoud be installed:"
-					while [[ $dn != 0 ]]; do
-						echo "$id. $(lsblk | grep disk | awk '{print $1}' | sed -n "$id"p)"
-						((dn--))
-						((id++))
-					done
-					echo -n "> "
-					read drvnm
-					if [[ $drvnm == "" ]]; then
-						echo && echo
-						echo "Can't be empty, retrying..."
-					fi
-					if [[ $drvnm > $(lsblk | grep disk | wc -l) ]]; then
-						echo && echo
-						echo "Illegal value, please choose something reasonable. Reatrying..."
-					fi
-					if [[ $drvnm < 0 ]]; then
-						echo && echo
-						echo "Illegal value, please choose something reasonable. Reatrying..."
-					fi
-					if [[ $drvnm == 0 ]]; then
-						echo && echo
-						echo "Illegal value, please choose something reasonable. Reatrying..."
-					fi
-				done
-				drv="/dev/"$(lsblk | grep disk | awk '{print $1}' | sed -n "$drvnm"p)
-				clear
-				echo "#========= I. DISK SETUP =========#"
-				echo "#                                 #"
-				echo "#      Please choose wisely       #"
-				echo "#                                 #"
-				echo "#      2. swap partion size       #"
-				echo "#                                 #"
-				echo "#=================================#"
-				while [[ $swps == "" ]]; do
-								echo && echo
-								echo "Please enter your swap partition disired size:"
-								echo "_G"
-								echo -n "> "
-								read swps
-								if [[ $swps == "" ]]; then
-												echo && echo
-												echo "Can't be empty, retrying..."
-								fi
-				done
-				clear
-				echo "#========= I. DISK SETUP =========#"
-				echo "#                                 #"
-				echo "#      Please choose wisely       #"
-				echo "#                                 #"
-				echo "#      3. root partion size       #"
-				echo "#                                 #"
-				echo "#=================================#"
-				while [[ $rts == "" ]]; do
-								echo && echo
-								echo "Please enter your root partition disired size:"
-								echo "__G"
-								echo -n "> "
-								read rts
-								if [[ $rts == "" ]]; then
-												echo && echo
-												echo "Can't be empty, retrying..."
-								fi
-				done
-				btsze="128M"
-				rtsze=$rts"G"
-				swpsze=$swps"G"
-				clear
-				echo "#============= CONFIRM THIS IS CORRECT ===============#" 
-				echo "#                                                     #"
-				echo "#                DRIVE TO USE: $drv               #"
-				echo "#                                                     #"
-				echo "#  /boot/efi > BOOT partition size: $btsze              #"
-				echo "#              SWAP partition size: $swpsze                #"
-				echo "#  /         > ROOT partition size: $rtsze               #"
-				echo "#  /home     > HOME partition size: all that remains  #"
-				echo "#                                                     #"
-				echo "#=====================================================#" 
-				echo && echo
-				echo "Is that correct? [y/N]"
-				echo -n "> "
-				read answr
-				if [[ $answr != y && $answr != Y && $answr != yes && $answr != Yes && $answr != YES ]]; then
-								echo && echo
-								echo "Retrying..."
-								echo
-								echo "Press [retrun] key to continue"
-								read
-				fi
-done
-
-# ================================================================================================ #
-# ========================================= USERS SETUP ========================================== #
-# ================================================================================================ #
-
-answr="n"
-
-while [[ $rtrtpwd != $rtpwd || $rtpwd == "" ]]; do
-				clear
-				echo "#======= II. USERS SETUP =========#"
-				echo "#                                 #"
-				echo "#        1. root password         #"
-				echo "#                                 #"
-				echo "#=================================#"
-				echo && echo
-				echo "Enter your disired root password (can't be empty):"
-				echo -n "> "
-				read -s rtpwd
-				echo && echo
-				echo "Confirm root password:"
-				echo -n "> "
-				read -s rtrtpwd
-				if [[ $rtrtpwd != $rtpwd ]]; then
-								echo && echo
-								echo "Password mismatch, retrying..."
-								sleep 2
-				fi
-				if [[ $rtpwd == "" ]]; then
-								echo && echo
-								echo "Password is empty, retrying..."
-								sleep 2
-				fi
-done
-
-clear
-echo "#======= II. USERS SETUP =========#"
-echo "#                                 #"
-echo "#          2. User add            #"
-echo "#                                 #"
-echo "#=================================#"
-echo && echo
-echo "Would you like to add a user to the system? [y/N]"
-echo -n "> " 
-read answr
-if [[ $answr == y || $answr == Y || $answr == yes || $answr == Yes || $answr == YES ]]; then
-				echo && echo
-				echo "Enter your desired username:"
-				echo -n "> "
-				read usr
-				isusr="true"
-				usr=$(echo $usr | tr '[:upper:]' '[:lower:]')
-				echo && echo
-				while [[ $usrusrpwd != $usrpwd || $usrpwd == "" ]]; do
-								echo "Enter your disired password for $usr (can't be empty):"
-								echo -n "> "
-								read -s usrpwd
-								echo && echo
-								echo "Confirm user password:"
-								echo -n "> "
-								read -s usrusrpwd
-								if [[ $usrusrpwd != $usrpwd ]]; then
-												echo && echo
-												echo "Password mismatch, retrying..."
-												sleep 2
-								fi
-								if [[ $usrpwd == "" ]]; then
-												echo && echo
-												echo "Password is empty, retrying..."
-												sleep 2
-								fi
-				done
-fi
-clear
-echo "#======= II. USERS SETUP =========#"
-echo "#                                 #"
-echo "#          3. hostname            #"
-echo "#                                 #"
-echo "#=================================#"
-while [[ $hstnm == "" ]]; do
-				echo && echo
-				echo "Enter your disired hostname for this terminal (can't be empty):"
-				echo -n "> "
-				read hstnm
-				if [[ $hstnm == "" ]]; then
-								echo && echo
-								echo "Hostname is empty, retrying..."
-								sleep 2
-				fi
-done
-answr="n"
-clear
-echo "#====== III. EXTRAS SETUP ========#"
-echo "#                                 #"
-echo "#            1. More              #"
-echo "#                                 #"
-echo "#=================================#"
-echo && echo
-echo "Do you wish to install Xorg and gst-plugins as well? [y/N]"
-echo -n "> "
-read answr
-if [[ $answr == y || $answr == Y || $answr == yes || $answr == Yes || $answr == YES ]]; then
-				somemore="true"
-fi
-clear
-answr=""
-if [[ $(lscpu | grep Intel) ]]; then
-	intelamdcpu="intel"
-fi
-if [[ $(lscpu | grep AMD) ]]; then
-	intelamdcpu="amd"
-fi
-if [[ $(lspci | grep Intel) ]]; then
-	intelamdgpu="intel"
-fi
-if [[ $(lspci | grep AMD) ]]; then
-	intelamdgpu="amd"
-fi
-
-# ================================================================================================ #
-# ===================================== THE ACTUAL INSTALL ======================================= #
-# ================================================================================================ #
-
-
-# ============================================================== #
-# ========================== NTP DATE ========================== #
-# ============================================================== #
-
-
-clear
-echo "#====== IV. INSTALLING LINUX =====#"
-echo "#                                 #"
-echo "#        1. Setting date          #"
-echo "#             via ntp             #"
-echo "#                                 #"
-echo "#=================================#"
-timedatectl set-ntp true
-sleep 2
-
-# ============================================================== #
-# ==================== PARTITIONING DISK ======================= #
-# ============================================================== #
-
-
-clear
-echo "#====== IV. INSTALLING LINUX =====#"
-echo "#                                 #"
-echo "#        2. Partitionning         #"
-echo "#          disk $drv          #"
-echo "#                                 #"
-echo "#=================================#"
-echo && echo
-dd if=/dev/zero of=$drv bs=512 count=1
-sed -e 's/\s*\([\+0-9a-zA-Z]*\).*/\1/' << EOF | fdisk $drv
-g	# create a new GPT partition table
-n	# new partition (/dev/sdx1)
-1	# partition number 1
-	# first sector (2048)
-+$btsze	# boot size partition
-Y	# YES
-n	# new partition (/dev/sdx2)
-2	# partition number 2
-	# default start block
-+$swpsze	# swap size partition
-Y	# YES
-n	# new partition (/dev/sdx3)
-3	# partition number 3
-	# default start block
-+$rtsze	# root size partition
-Y	# YES
-n	# new partition (/dev/sdx4)
-4	# partition number 4
-	# default start block
-	#	all that remains
-t	# change partition type
-1	# part 1
-1	# EFI partition type
-t	# change partition type
-2	# partition number 2
-19	# swap partition type
-w	# write the partition table and quit
-EOF
-mkswap $drv"2"
-mkfs.fat -F32 $drv"1"
-mkfs.ext4 $drv"3"
-mkfs.ext4 $drv"4"
-sleep 2
-clear
-echo "#====== IV. INSTALLING LINUX =====#"
-echo "#                                 #"
-echo "#     3. Mounting partitions      #"
-echo "#                                 #"
-echo "#=================================#"
-swapon $drv"2"
-mkdir /mnt/arch
-mount $drv"3" /mnt/arch
-mkdir /mnt/arch/boot
-mkdir /mnt/arch/boot/efi
-mount $drv"1" /mnt/arch/boot/efi
-mkdir /mnt/arch/home
-mount $drv"4" /mnt/arch/home
-sleep 2
-clear
-echo "#====== IV. INSTALLING LINUX =====#"
-echo "#                                 #"
-echo "#    4. Installing base system    #"
-echo "#                                 #"
-echo "#=================================#"
-pacstrap /mnt/arch base base-devel pacman-contrib
-sleep 1
-clear
-echo "#====== IV. INSTALLING LINUX =====#"
-echo "#                                 #"
-echo "#   4.5 Installing some extras    #"
-echo "#                                 #"
-echo "#=================================#"
-pacstrap /mnt/arch zip unzip p7zip vim mc alsa-utils syslog-ng mtools dostools lsb-release ntfs-3g exfat-utils git zsh
-pacstrap /mnt/arch ntp cronie
-pacstrap /mnt/arch grub os-prober efibootmgr
-sleep 1
-clear
-echo "#====== IV. INSTALLING LINUX =====#"
-echo "#                                 #"
-echo "#       5. Generating fstab       #"
-echo "#                                 #"
-echo "#=================================#"
-genfstab -U /mnt/arch > /mnt/arch/etc/fstab
-sleep 2
-clear
-echo "#====== V. CONFIGURING LINUX =====#"
-echo "#                                 #"
-echo "#      1. Now changing root       #"
-echo "#                                 #"
-echo "#=================================#"
-sleep 2
-sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#      2. Setting time zone       #
-	#        to Paris, France,        #
-	#    for this is my time zone.    #
-	#  Change this later accordingly  #
-	#      to your own time zone      #
-	#    (Joe didn't find a quick     #
-	#     and easy way to ask you     #
-	#      about your time zone,      #
-	# Joe hopes your can  understand) #
-	#                                 #
-	#=================================#
-	ln -sf /usr/share/zoneinfo/Europe/Paris /etc/localtime
-	sleep 8
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#    3. Setting hardware clock    #
-	#          and ntp again          #
-	#                                 #
-	#=================================#
-	hwclock --systohc
-	ntpdate fr.pool.ntp.org
-	systemctl enable ntpd
-	sleep 1
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#        4. Localization          #
-	#          (en_US.UTF-8)          #
-	#                                 #
-	#=================================#
-	sed 's/#en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/' /etc/locale.gen > /etc/locale.gen.42
-	mv /etc/locale.gen.42 /etc/locale.gen
-	locale-gen
-	echo "LANG=en_US.UTF-8" > /etc/locale.conf
-	sleep 2
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#       5. Setting hostname       #
-	#                                 #
-	#=================================#
-	echo $hstnm > /etc/hostname
-	echo "127.0.0.1 localhost" > /etc/hosts
-	echo "::1 localhost" >> /etc/hosts
-	echo "127.0.1.1 $hstnm.localdomain $hstnm" >> /etc/hosts
-	sleep 2
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#     6. Setting root password    #
-	#                                 #
-	#=================================#
-	passwd
-$rtpwd
-$rtpwd
-	sleep 2
-	clear
-	#===== IV. CONFIGURING LINUX =====#
-	#                                 #
-	#     7. Setting up network       #
-	#                                 #
-	#=================================#
-	pacman -S networkmanager
-	Y
-EOF
-sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
-	systemctl enable NetworkManager
-	sleep 2
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#        8. journald stuff        #
-	#                                 #
-	#=================================#
-	sed 's/#ForwardToSyslog=no/ForwardToSyslog=yes/' /etc/systemd/journald.conf > /etc/systemd/journald.conf.42
-	mv /etc/systemd/journald.conf.42 /etc/systemd/journald.conf
-	sleep 2
-EOF
-if [[ $somemore == "true" ]]; then
-	sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#         9. Installing           #
-	#        some more utils          #
-	#     (gst plugins, xorg...)      #
-	#                                 #
-	#=================================#
-	pacman -S gst-plugins-{base,good,bad,ugly} gst-libav xorg-{server,xinit,apps} xf86-input-{mouse,keyboard} xdg-user-dirs mesa xf86-video-vesa
-
-	Y
-EOF
-fi
-if [[ $intelamdgpu == "intel" && $somemore == "true" ]]; then
-	sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
-	sleep 2
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#        9.5 Installing           #
-	#        some more utils          #
-	#         (xf86-video)            #
-	#                                 #
-	#=================================#
-	pacman -S xf86-video-intel
-	Y
-	sleep 2
-EOF
-fi
-if [[ $intelamdgpu == "amd" && $somemore == "true" ]]; then
-	sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
-	sleep 2
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#        9.5 Installing           #
-	#        some more utils          #
-	#         (xf86-video)            #
-	#                                 #
-	#=================================#
-	pacman -S xf86-video-amdgpu
-	Y
-EOF
-fi
-if [[ $isusr == "true" ]]; then
-	sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
-	sleep 2
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#      10. Installing sudo        #
-	#                                 #
-	#=================================#
-	pacman -S sudo
-	Y
-EOF
-sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
-	sleep 2
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#      11. Generating user        #
-	#                                 #
-	#=================================#
-	useradd -m -g wheel -s /bin/zsh $usr
-	passwd $usr
-$usrpwd
-$usrpwd
-	sed 's/# %wheel ALL=(ALL) ALL/%wheel ALL=(ALL) ALL/' /etc/sudoers > /etc/sudoers.42
-	mv /etc/sudoers.42 /etc/sudoers
-	sleep 2
-	exit
-EOF
-fi
-if [[ $intelamdcpu == "intel" ]]; then
-	sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#      12. Installing CPU         #
-	#           microcode             #
-	#                                 #
-	#=================================#
-	pacman -S intel-ucode
-	Y
-EOF
-fi
-if [[ $intelamdcpu == "amd" ]]; then
-	sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
-	clear
-	#===== V. CONFIGURING LINUX ======#
-	#                                 #
-	#      12. Installing CPU         #
-	#           microcode             #
-	#                                 #
-	#=================================#
-	pacman -S amd-ucode
-	Y
-EOF
-fi
-sed -e 's/\s*\([\+0-9a-zA-Z \"=#()[]{}<>,:. - \_\/?!@$%^&~`*|]*\).*/\1/' << EOF | arch-chroot /mnt/arch
-	sleep 2
-	clear
-	#===== VI. CONFIGURING BOOT ======#
-	#                                 #
-	#   1. Generating Kernel image    #
-	#                                 #
-	#=================================#
-	mkinitcpio -p linux
-	sleep 1
-	clear
-	#===== VI. CONFIGURING BOOT ======#
-	#                                 #
-	#       2. Configuring GRUB       #
-	#                                 #
-	#=================================#
-	grub-mkconfig -o /boot/grub/grub.cfg
-	grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=arch_grub --recheck
-	sleep 4
-	exit
-EOF
-echo && echo
-clear
-echo "#========= WORK COMPLETE =========#"
-echo "#                                 #"
-echo "#     Your system should now      #"
-echo "#         be installed.           #"
-echo "#   Thank your for using Joe's    #"
-echo "#           ARCH LINUX            #"
-echo "#      UEFI INSTALL UTILITY       #"
-echo "#                                 #"
-echo "#   Your system will now reboot   #"
-echo "#                                 #"
-echo "#=================================#"
-echo && echo
-sleep 10
-umount -R /mnt/arch
-reboot